Border routers

Fri Jul 17 17:19:21 UTC 2009

Thank you guys, This will be useful, but I still have some questions:
Where can I see comparations between the routers? Also, where can I find
datasheets containing FIB, RIB and BGP routes limits for cisco and Juniper?
It is quite dificult!

Thanks again!

2009/7/17 Larry Stites <ncnet at sbcglobal.net>

> Livio,
>
> Tough economic conditions and heightened environmental awareness have many
> ISPs, Telcos and NOCs considering Green IT as viable option when purchasing
> network hardware. As licensed resellers of previously owned network
> equipment we stock and supply Juniper and Cisco routers, switches and
> associated modules.
>
> For example:
>
> (1) JUNIPER M10iBASE
> (2) RE-850-1536
> (2) FEB-M10I-M7I
> (2) HCM-M10I-M7I
> (4) PWR-M10I-M7I-AC  can be switched to DC
>
> New, back up surplus, unused condition - $15,500
> Original box, packing, Junos and accessories
>
> (1) JUNIPER M10iBASE
> (1) RE-850-1536
> (2) FEB-M10I-M7I
> (2) HCM-M10I-M7I
> (4) PWR-M10I-M7I-AC  can be switched to DC
>
> New, back up surplus, unused condition- $11250/EA
> Original box, packing, Junos and accessories
> (2) bundles available in this config and condition
>
> (1) JUNIPER M10iBASE
> (1) RE-850-1536
> (1) FEB-M10I-M7I
> (2) HCM-M10I-M7I
> (4) PWR-M10I-M7I-DC
>
> Refurbished condition- $9K
> Respectfully used, very good condition
> Power cords, Junos and rack kit included.
>
> (6) PE-1GE-SX-B $1450/each
>
> Also available:
>
> (4) Juniper M5BASE-2AC-E each configured as:
> ( 4 PIC Slot Chassis: (1) Built-in Enhanced FPC, Cooling, Midplane,
> Forwarding Engine Board (with Internet Processor II, ASIC, 8MB SSRAM,
> Routing Engine 2.0 (333Mhz - 768Mb), (2) AC Power Supply,  $3500.each
>
> Subject to prior sale
> Warranty minimum 90 days
> References available
>
>
> --
>
> Best regards,
>
>
> Larry E. Stites
> Northern California Networks, Inc.
> United Network Equipment Dealers Association
> CA LIC#2004 SR KH 100-484111
> Nevada City, CA 95959
> cell 530 320 4194
> land 530 265 2588
> ncnet at sbcglobal.net
> www.uneda.com
> --
>
>
> on 7/16/09 1:40 PM, Livio Zanol Puppim wrote:
>
> > Hello guys,
> >
> > I need to buy 2 border routers to handle 2 155Mbps links using BGP full
> > route with each ISP. What may I analyse at the routers hardware?
> >
> > I'm asking for:
> > 1Giga Byte of RAM expansible to 1,5GB
> > 1.000.000 FIB capacity in hardware (since 512K won't be enought soon)
> > 1.000.000 RIB capacity.
> >
> > What do you recommend to ask for? Are these specifications ok? Do I need
> > more RAM or less FIB?
> > Is there any site I can use to see specifications for border routers?
> Anyone
> > knows of any PoC involving routers?
>
>
>
>
>
>

-- 
[]'s

Lívio Zanol Puppim