eigrp and managed ethernet

Philip Lavine source_route at yahoo.com
Tue Sep 23 11:25:34 CDT 2008


What is really bizarre is that I am down for minutes not seconds and the timers never fire. If I don't manually passive the connection eigrp will for some reason think there is a neighbor even though I am unable to source ping across the WAN.



----- Original Message ----
From: Matthew Huff <mhuff at ox.com>
To: Philip Lavine <source_route at yahoo.com>; nanog <nanog at merit.edu>
Sent: Tuesday, September 23, 2008 8:59:14 AM
Subject: RE: eigrp and managed ethernet

Correct. Eigrp neighbor connectivity has a short-cut when L2 connectivity goes down, otherwise it will use the eigrp neighbor hold-down timer. You can decrease that timer:

interface fa0/0
  ip hello-interval eigrp p x
  ip hold-time eigrp p y

where p is your eigrp as-number, and x is how often you want the hello (in seconds) and y is the max hold-down timer. Generally y is = x * 3

http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfeigrp.html


----
Matthew Huff       | One Manhattanville Rd
OTA Management LLC | Purchase, NY 10577
www.ox.com                | Phone: 914-460-4039
aim: matthewbhuff  | Fax:   914-460-4139

-----Original Message-----
From: Philip Lavine [mailto:source_route at yahoo.com]
Sent: Tuesday, September 23, 2008 11:43 AM
To: nanog
Subject: eigrp and managed ethernet

For some reason when I lose layer 3 connectivity between two managed Ethernet sites EIGRP does not bounce.Is this because the physical interface does not bounce?


      




More information about the NANOG mailing list