Power/temperature monitoring
Jeremy Anderson
jeremy.anderson at reignmaker.net
Fri May 30 15:09:10 UTC 2008
http://akcp.com/company/sensorProbe8.htm
Everything you need.
Jeremy
On Fri, 2008-05-30 at 09:58 -0500, Frank Bulk wrote:
> Hopefully monitoring the status of a network is on-topic.
>
> I'm looking for temperature and power monitoring unit to install in some
> remote BWA cabinets. We had two incidents where we lost power in a town and
> we weren't aware of it until the backup batter drained to empty, and another
> situation where the cabinet became too cold. Because these cabinets are
> less than 19" wide and just 3-5" deep, I need something quite small. I did
> find one product but it requires four components (unit with built-in
> temperature sensor, adapter, and AC power sensor, plus power supply)
>
> Perhaps there's someone on this list who has gone down this road and can
> point me to a good product.
>
> Required:
> - temperature sensor
> - 110 VAC power monitoring (on/off, not necessarily current)
> - Ethernet interface (at least SNMP, Web GUI and
>
> Optional:
> - fed via 12 VDC power
> - 12 VDC power monitoring (current)
> - humidity sensor
>
>
> Frank
>
>
More information about the NANOG
mailing list