40Gbit private peer

Petri Helenius pete at he.iki.fi
Fri Aug 3 08:00:30 UTC 2007


Leigh Porter wrote:
>
> Hey,
>
> BEcause you really need it ;-)
>
> 30 second input rate 77849000 bits/sec, 7236 packets/sec
> 30 second output rate 17464000 bits/sec, 5023 packets/sec
>
> Very nice though, it'll be great for all the P2P.
Maybe Peter's mother needs a faster LAN connection to her computer?

Pete

>
> -- 
> Leigh
>
>
>
> Peter Lothberg wrote:
>> SUnet (AS1653) and STUPI (AS1880) want to announce that we have 
>> brought up what we believe is the first private peer at 40G between 
>> two independent networks.
>>
>> It speaks IPv4, IPv6 both unicast and multicast.
>>
>> -Peter
>>
>> ------------------------------------------------------------------------
>>
>> RP/0/RP0/CPU0:HFR1-F#sh int pos 0/3/0/0
>> POS0/3/0/0 is up, line protocol is up
>>   Interface state transitions: 2
>>   Hardware is Packet over SONET/SDH
>>   Description: OC768 Private Peering to Sunet <ip at nordu.net>
>>   Internet address is 193.11.20.146/30
>>   MTU 4474 bytes, BW 39813120 Kbit
>>      reliability 255/255, txload 0/255, rxload 0/255
>>   Encapsulation HDLC, crc 32, controller loopback not set, keepalive 
>> set (10 sec)
>>   Last clearing of "show interface" counters 1d00h
>>   30 second input rate 77849000 bits/sec, 7236 packets/sec
>>   30 second output rate 17464000 bits/sec, 5023 packets/sec
>>      115627177 packets input, 155140727534 bytes, 0 total input drops
>>      0 drops for unrecognized upper-level protocol
>>      Received 0 runts, 0 giants, 0 throttles, 0 parity
>>      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
>>      78946374 packets output, 34499886901 bytes, 0 total output drops
>>      0 output errors, 0 underruns, 0 applique, 0 resets
>>      0 output buffer failures, 0 output buffers swapped out
>>
>> RP/0/RP0/CPU0:HFR1-F#sh controllers soNET 0/3/0/0
>> Port SONET0/3/0/0:
>>
>> Status: Up
>>
>> Loopback: None
>>
>> SECTION
>>   LOF = 0          LOS    = 0                            BIP(B1) = 0
>> LINE
>>   AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
>> PATH
>>   AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
>>   LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
>>   PLM = 0          TIM    = 0
>> Detected Alarms: None
>> Asserted Alarms: None
>> Mask for Detected->Asserted: None
>> Detected Alerts: None
>> Reported Alerts: None
>> Mask for Detected->Reported: None
>> Alarm reporting enabled for: SLOS SLOF SF_BER PLOP
>> Alert reporting enabled for: B1-TCA B2-TCA B3-TCA
>>
>> Framing: SONET
>> SPE Scrambling: Enabled
>> C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling 
>> Derived
>> S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived
>>
>> PATH TRACE BUFFER : STABLE
>>   Remote hostname : c1sth-re1 so-7/0/0
>>   Remote interface:
>>   Remote IP addr  :
>>
>> APS
>> No APS Group Configured
>>   Protect  Channel 0   DISABLED
>>   Rx(K1/K2) : 0x00/0x00
>>   Tx(K1/K2) : 0x00/0x00
>>   Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/
>>
>>
>> BER thresholds:  SF = 10e-3  SD = 10e-6
>> TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6
>>
>>   Optics type: VSR2000-3R2 (2km)
>>   Clock source: internal (actual) internal (configured)
>>
>> Optical Power Monitoring (accuracy: +/- 1dB)
>>   Rx power = 1.3796 mW, 1.4 dBm
>>   Tx power = 1.7380 mW, 2.4 dBm
>>   Tx laser current bias = 58.3 mA
>>   
>




More information about the NANOG mailing list